Extreme Penetration
Delivers market leading penetration to quickly loosen and release metal parts that are stuck, seized or rusted together.
Lubrication
Once applied, creates a thin, colourless soft coat to help keep parts loose and free from corrosion.
Clean & Protect
The active ingredients get under dirt, grime and grease, allowing for easier cleaning, and form a soft protective layer against rust and corrosion.
Displaces Moisture
The XCP formula quickly displaces
water, allowing the “drying out” of electrical short circuits
caused by moisture.
A TRUE MULTIPURPOSE SPRAY
XCP ONE is a universal spray that can solve and prevent many problems. It is designed to penetrate, lubricate, displace moisture, as well as clean and protect against corrosion. The formula was developed based on many years of industrial experience. Therefore, it always delivers maximum performance!
With XCP One you can use just one product!
XCP ONE can be used on any metal surface like nuts, bolts, screws, valves, chains, bearings, couplings, levers, locks, hinges, cables, pulleys, winches, pedal crank arms, derailleur assemblies, gear mechanisms, and many more!
It’s the only maintenance spray used by The AA to keep their 15 million members moving and on the road. You can trust XCP One to provide the highest standards in multipurpose maintenance.
UNIQUE FEATURES
- Multipurpose and high performance
- Thin, colourless soft coating
- Allows to quickly loosen and release metal parts
- Ease cleaning, protects against rust and corrosion
- Quickly displaces water
- Lower evaporation rate – long lasting results
- The liquid is voc free and non-flammable
- UP TO 50% MORE EFFECTIVE LOOSENING
PENETRATION EFFICACY TEST
We tested nine multi-purpose maintenance fluids using in-house standard operating procedures for penetrative properties.
RESULTS: Both XCP One and XCP Green One have a marked improvement in penetrative performance in comparison to alternative multi-purpose products tested.
That makes XCP One up to 50% more effective at loosening rusted bolts than competitors! Use it to release metal parts that are stuck, seized or rusted together.
Penetration efficacy was measured by determining the torque required to release a bolt that has been rusted into a steel block.
PROCEDURE: At first we prepared the mild steel test blocks with a thread tapped from a circular well cut into the top face. Then we filled the section with salt water for 24 hours. A mild steel hex bolt was also submerged in salt water.
After 24 hours, the hex bolt was tightened into the steel test block to a measured torque. Then both the block and bolt were left to stand for 48 hours.
A known volume of the test product was then introduced into the well around the hex bolt head and the block was left to stand for 7 days.
Then we measured the torque required to release the bolt head from the block.